&nbsp;Welcome to HADES &nbsp; &nbsp; &nbsp; &nbsp;<br />Hydraulic and Design Engineering Systems
  • Home
  • Projects
  • Engineering BLOG
  • Hydraulic Design Project
  • Published articles

Know thy Imposed Loads - Fluid Power Design

7/7/2014

1 Comment

 
Picture
Reading a few posts on hydraulic forums I still see some commentators will dive straight into circuit design recommendation without asking about the nature of the imposed loads and other factors which have a profound affect on the system design. This only leads to poorly designed systems or far worse, systems which are not fit for their purpose and will need major rectification.

One example is a recycling plant machine design I was involved with. The start up power was not considered as significant and the whole design was based on normal running. The result was an underpowered hydraulic system. Fortunately changing to variable power control devices fixed the issue but the intended overall production rate was less than required and with lots of finger pointing at the time.

Another example, we were breaking axles on a mobile machine driving down hill, scratching our heads saying "don't you break axles going up the hill?" No, since mechanical inefficiencies work backwards in a system on a down hill run and become significant with large gradient differences. A simple fix was set a cross port relief for up the hill and another different setting for down the hill. I bet the guys who designed The Titanic wished it was that simple!

Anyhow I'm guilty and seen others do so many times is not considering the nuances of the imposed loads and straight away begin a schematic design and even component selection of a circuit only to do major changes when the "goal post moves" due to new loads being included, which results in wasting time, money and loss of the client's confidence.

A brief example to help make the idea clearer.

Some questions I asked based on a project of a mobile drilling machine.

Imposed Loads:

1. What happens: When the drill breaks through, the drill binds, hammering whilst drilling, to the torque when drilling through different strata, drill mast movement while drilling.

2. From that: We had to ensure machine stability, protect the hydraulic motor from over speeding, methods to control the feed rate, limit the drill force.

Providing a more comprehensive circuit than just turning a hydraulic motor.

The moral to the story is ti think about the nature of the load, come up with the pertinent questions, have some expectation as how it will behave then begin to design an appropriate system.

As Sun Tzu said in The Art of War "If you know the enemy and know yourself you need not fear the results of a hundred battles" well maybe he really meant not fear a hundred hydraulic circuits.

Next: using relevant Standards in fluid power design ( possibly more exciting reading than Harry Potter)



1 Comment

    Archives

    December 2014
    July 2014
    May 2014
    December 2013
    November 2013
    October 2013

    Author

    Raymond Ho -
    Mechanical Engineer
    over 25 years experience in hydraulics and engineering

    Categories

    All
    Airbag Weighing System
    Clark Forklift
    Concrete Pump
    Engineering
    Forces
    Higher Education
    Hydraulic Circuit
    Hydraulic Cylinder
    Hydraulic Cylinders
    Hydraulic Pump
    Mechanical Engineering
    Truck

    RSS Feed

Powered by Create your own unique website with customizable templates.